DATALIGHT® – Stable internet in every room

Entirely new possibilities thanks to home networking via optical fibres!

Be it new construction, renovation or simply retrofitting a network connection – with DATALIGHT you opt for the right solution for a stable data network.
Optical fibre lines forward the data exactly to the spots where they are actually required. In each room – to each terminal device.

The perfect connection – small and flexible

On each route 1 Gbit / s user data rate

Fast installation – Plug and Play

A future-proof infrastructure in the home network can be easily implemented by means of active and passive connections – both can be combined at will, and reliably forward the data rates of up to 1 Gbps to the spots where they are required.

With the active components, you can establish a basis installation covering all your current requirements. Passive outlets are a perfect complement in order to be prepared for the future as well as any potential adjustments in the home network. This combination offers you a flexible and future-proof home network for your individual use.

Our recommendation:

Ideally, data lines are each guided to one socket combination per wall. Active concealed components, e.g., a LAN access point or wireless access point, can be integrated directly into the switch combination. These are particularly suited for large devices whose location in the room is clearly defined. They can be perfectly complemented by passive outlets with standardised SMI plug-in connection: the desired additional components for LAN ports or Wi-Fi can be connected here whenever needed. This allows you to remain flexible about where to install further devices such as a video game console or a sound system.

DATALIGHT – the clever alternative for the home network. Go to Reference reports.

Application examples



The stable network structure makes it possible to stream high-definition films in the best possible HDTV image quality and sound quality.



Particularly in home offices or studies, a lot of devices require network access (PC, printer, telephone, network-attached storage, etc.).



Smartphones or tablets can also benefit from quick and reliable data transfer via optical fibre through the wireless access points.



If the IP intercom system is connected through the network, the visitor appears on the screen, tablet or smartphone.


The installation via passive outlets with SMI plug-in connection allows an exceptionally easy installation of the DATALIGHT system, and ensures high flexibilty of application, since the devices can be connected or replaced whenever required.

Retrofitting a network

Image 1: Connect the DATALIGHT media converter to the router using a patch cable and connect the included power cable to a socket outlet.

Image 2: The POF cable from the media converter can be pulled to the terminal device through existing electrical conduits. If necessary, the cable can also be routed to its desired destination in baseboards, under the floor or in corners.

Image 3: At the destination, plug the POF cable into another media converter. You can establish the required power connection directly at the terminal device using the included USB plug. Finally, connect the terminal device with the media converter using a patch cable. Done!

Are you convinced?

There is now no obstacle to stable internet in all your rooms – go ahead and use our installer search to find a competent electrical engineering company in your area.